Hebrock K34 edgebander with preliminary milling and corner making

ADVANTAGES

- pre-cutter
- earning corners
- new machine
- guarantee
- CE certificate
- professional

TECHNICAL DATA

PRODUCT FEATURES

Thanks to the K34 edgebander, you are a big step ahead of the competition. You have a reliable machine that is easy and convenient to use. Additionally, additional equipment options are available for the K34.

SPS control to control the operation of the machine:
– 15“ Touchscreen monitor with simple graphical operation
– saving machining programs
– program and service in Polish
– the software fully controls the operation of the machine
– indication of the amount of glued edge and working time on individual programs with the possibility of zeroing

Pneumatic package.

Pre-milling of the board with diamond cutters (DIA LEUCO), including cutters:
– maximum milling depth 2 mm, milling height 45 mm
– a unit with two milling spindles, the first of which works concurrently and the second counter-rotatingly
– standard machine equipped with tools
– pneumatic advance and retraction of tools
– 2 x 2,2 kW generator; 12.000 rpm; cutters 2 pcs.

Maintenance-free glue pot for glue granules with the option of a replaceable pot, polyurethane and glue trigger:
– glue heating-melting time approx. 4 min.
– glue pot placed above the glue roll, the glue flows by gravity
– pneumatically controlled automatic start of the glue application roller and automatic opening of the glue dispensing - this means that after reaching the temperature of 170˚C, the glue dispensing is automatically opened and the application roller starts to rotate, when the machine is turned off when the temperature drops below 170˚C degrees the shutter responsible for dispensing glue closes and the overlapping roller stops, the operator does not have to remember about this activity, these are the most common causes of glue leaks; here it is done automatically
– a very effective and easy system for cleaning the glue tank using paddles placed inside
– heating power 4,5 KW
– engine power of the glue application roller 0,18 kW
– stepless temperature regulation 0 –200˚C

Electropneumatic guillotine for cutting edges from a roll up to 3 mm thick.
The pressure zone of the veneer against the narrow surface of the element:
– equipped with 4 pressure rollers, the first of which is rubber and the rest are made of chrome-hardened steel
– the first and second roller presses the edge on the entire surface, while the remaining ones press in the upper and lower part of the edge of the element, which results in greater effectiveness thanks to the selected pressing force
– each roller can be adjusted separately and the pressure force

Crosscut station, trimming excess edge on the front and back with a double trimming station:
– operating on a high-frequency converter of 300 Hz, engine speed of 16.000 rpm; 0,37 kW motor
– accurate cutting adjustment system
– has central lubrication

Milling station operating on a high-frequency converter
– for milling excess edge from the bottom and top of the element
– very solid and strong units mounted on special bases, which guarantees precision and stability of machining even after many years of operation
– system for blowing the edges of the element when milling the edge
– unit equipped with a milling head with replaceable HM steel plates for milling edges on a radius, straight and at an angle
– powerful machining engines 2 x 0,6 kW; 16.000 rpm.
– 2 x LEUCO heads 74 x 38 x 16; heads each equipped with 4 HM R2 plates
– system for precise setting of cutters from the operator's side – Hebrock system and patent, setting accuracy 0,01 mm

Corner rounding unit:
– 0,37 kW motor; 16.000 rpm
– maximum thickness of the workpiece 42 mm
– minimum element length approx. 200 mm for double-sided milling

Flat scraper and glue unit
– increasing the standard of finishing the narrow surface on the edge of the element
– for removing glue remnants and excess edge, creating a perfectly flat surface where the veneer meets the element

Polishing station:
– 2 x 0,18 kW engines; 1360 rpm.
– setting range: up, down, right, left, at an angle

Durable crawler drive.
Top pressure with double, ball-bearing rollers.
Retractable support for the processed material.

Net price calculated according to the euro exchange rate (with larger exchange rate fluctuations the price may change)