ADVANTAGES
- pre-cutter
- earning corners
- new machine
- guarantee
- CE certificate
- professional
TECHNICAL DATA
thickness of the rim | to 3mm |
thickness of elements | 8 - 50mm |
the minimum length of the element | approximately 160mm |
feed speed | 10m/min. |
glue heating time | around 3,5min |
total power consumption | about 7,4kW |
electrical connection | 400 V, 50 Hz |
working height | approximately 900mm |
dimensions of the machine | 4300 x 1300 x 1400 mm |
weight of the machine | About 900kg |
diameter of the extraction nozzle | ø 1 × 140 mm |
temperature range – EVA | 150 ° C - 220 ° C |
temperature range – PUR | 110 ° C - 140 ° C |
PRODUCT FEATURES
Maximum efficiency in board veneering for the craftsman.
F5 next edgebander with preliminary milling and corner making. If you require maximum performance, the Hebrock F5 is the answer to your needs in edgebanding at a craft level. F5 guarantees perfect edge processing at every stage of work. This is made possible by its excellent equipment that meets the highest requirements: pre-milling up to 50 mm, pressure zone, cross-cutting, framing unit, radial scraper, corner trimming unit, flat scraper, polisher. F5 is a very flexible machine when it comes to changing the configuration or replacing units with other ones, according to your needs. Experience perfect edging from start to finish with the Hebrock F5!
SPS control to control the operation of the machine:
15-inch Touch Screen monitor with simple graphical operation
saving machining programs
program and service in Polish
the software fully controls the operation of the machine
indication of the amount of glued edge and working time on individual programs with the possibility of zeroing
Pneumatic package.
Initial milling of the board with diamond cutters (DIA LEUCO), including cutters:
maximum milling depth 2 mm
unit with two milling spindles with a power of 1,1 kW each, the first of which works concurrently and the second counter-rotating
the machine is equipped with tools as standard
Pneumatic guillotine for cutting edges from a roll up to 3 mm thick.
Maintenance-free glue tank for glue granules with the option of a replaceable container, polyurethane and glue drain:
heating-melting time of the glue approx. 3,5 min.
glue pot placed above the glue roll, the glue flows by gravity
pneumatically controlled automatic start of the glue application roller and automatic opening of the glue dispensing - which means that after reaching the temperature of 170˚C, the glue dispensing automatically opens and the application roller starts to rotate, when the machine is turned off, when the temperature drops below 170˚C, the degree is closed the shutter responsible for dispensing glue turns on and the overlapping roller stops, the operator does not have to remember about this activity, these are the most common causes of glue leaks; here it is done automatically
Cross-cutting station, precisely cutting off the excess edge at the front and back using a saw unit.
Milling station operating on a 300 Hz high-frequency converter:
for milling excess edge from the bottom and top of the element
very solid and strong units mounted on special bases, which guarantees precision and stability of machining even after many years of operation
unit equipped with a milling head with replaceable HM steel plates for edge milling
rotational speed of cutters 12.000
pneumatic adjustment of the chamfer radius from the desktop position
Flat scraper and glue unit:
increasing the standard of finishing the narrow surface on the edge of the element
for removing adhesive residues and excess edge, resulting in a perfectly flat surface when the veneer touches the element
equipped with HM steel plates
Corner rounding unit:
0,37 kW motor; 16.000 rpm
maximum workpiece thickness 50 mm
minimum element length approx. 160 mm for double-sided milling
Profile scraper unit:
unit for smoothing the profile in PVC and ABS edges, eliminating the vertical knife mark after milling
including pneumatic retraction and retraction of the unit
plates made of HM R2 steel
Polishing station:
2 x 0,18 kW engines; 1360 rpm.
Setting range: up, down, right, left, at an angle
Durable crawler drive.
Top pressure with double, ball-bearing rollers.
Retractable support for the processed material.
Optional equipment:
multicycline (R1/R2)
cleaning showers (front)
nesting (blocking the unit)
additional roller conveyor
LED lighting
extra glue pot
cleaning showers (rear)
PUR Box (polyurethane container)
preliminary milling of thick elements up to 50 mm
barcode recognition (including scanner)
spraying on the edge of the acrylic form
road wheels
air cushion table
pneumatic 3-point regulation
Net price calculated according to the euro exchange rate (with larger exchange rate fluctuations the price may change)
Opinions
There are no reviews yet.