ADVANTAGES
- pre-cutter
- new machine
- guarantee
- CE certificate
- professional
TECHNICAL DATA
plate thickness | 45 mm |
edge thickness | 0,4 mm - 3 mm |
min the width of the plate | 90 mm |
min the length of the disc | 90 mm |
feeding speed | 7m/min |
initial milling | 9000 revolutions / min |
up and down | 10500 revolutions / min |
front back | 8800 revolutions / min |
polishing | 2800 revolutions / min |
engine | 6kW |
feed power | 0,75kW |
pre-milling power | 1,5kW |
glue spindle power | 0,25kW |
top-bottom milling power | 0,18kW |
top milling power | 0,55kW |
3 phase polishing engine from the top | 0, 12 kW 1 phase - 0, 18 kW |
3 phase polishing motor from the bottom | 0, 12 kW 1 phase - 0, 18 kW |
table working height | 856 mm |
Widened support width | 560 mm |
extraction connector | 3x100mm |
dimensions length / width / height | 3200 / 1200 / 1200mm |
weight | 660kg |
PRODUCT FEATURES
With pre-milling (diamond heads), radial scraper and polisher.
Operating panel with keyboard, electronic glue temperature settings, heated guide.
Heavy Duty Chain Feeder - The fixed material feed mechanism consists of a chain and a set of drive rollers that do not leave scratches on the surface of the workpiece.
Preheating in case the hob may be too moist due to bad weather conditions, this heating helps dry the hob to achieve a good finish.
Pressure roller - the pressure roller unit improves the bond between the edge and the material. The unit is mechanically pressed by a spring, suitable for the configuration system and can be adjusted exactly to the required edge thickness.
Up and down milling unit. The ability to adjust settings from milling to fine smoothing of thin edges, as well as quick and easy trimming of narrow edges.
The pre-milling unit - two milling diamond heads ensure that the edge of the workpiece is completely straight compared to the material being glued.
Guillotine shears - you can use the guillotine shears to cut material coiled up to 3 mm thick.
Teflon coated adhesive container with a capacity of 1,2 kg is intended for hot-melt adhesives. The adhesive is applied by means of an adjustable adhesive roller.
Radial radius fine-tunes the radius of the edge and removes excess glue.
The double end ball cutting unit provides a perfect cut even with the 3 mm veneer.
Polishing unit - this unit leaves a perfect finish on the edges of ABS and PVC and removes any discoloration at the edges, which is especially evident when working with dark material on the edges.
The net price is calculated according to the euro exchange rate
(with higher price fluctuations the price may change)
Marcin -
Super edgebander for not a lot of money, I was the first to try it and I do not regret it easy to use. I recommend highly ?
Roman -
The perfect edgebander for my needs. I have had it for two years now and recommend it to all who appreciate accuracy.