ADVANTAGES
- for 5 heads
- DTR + CE documentation
- locked in the cabin
- intended for professional use
TECHNICAL DATA
Working width min. | 50 mm |
Max working width | 400 mm |
Working height min. | 10 mm |
Working height max. | 300 mm |
Number of spindles | 5 |
Rotation speed | 6000 rpm |
Tool diameters: | |
Lower spindle | Ø 160 - 180 |
Right spindle | Ø 160 - 230 |
Left spindle | Ø 160 - 230 |
Upper spindle | Ø 160 - 230 |
Second lower spindle | Ø 160 - 230 |
Spindle diameter | 50 mm |
Engine power: | |
Lower spindle | 15 kW / 20HP |
Right spindle | 11 kW / 15HP |
Left spindle | 11 kW / 15HP |
Upper spindle | 15 kW / 20HP |
Second lower spindle | 15 kW / 20HP |
feed | 7,5kW / 10HP |
Lifting feed up / down | 1,5kW / 2HP |
Total power | 76kW / 102,2HP |
Feed speed | 5-25m / min |
Extraction connector | 150 mm / 180mm |
Overall dimensions | 5000x2200x1950 mm |
Weight | 10500kg |
PRODUCT FEATURES
A wide range of machined dimensions allows the processing of large elements. Max. the working width is 400 mm and the max. height 250 mm.
Each spindle with a diameter of 50 mm. External bearing for horizontal spindles with increased load capacity. The diameter of the cutting tools reaches as much as 230 mm, which results in a higher quality of processing.
The feed system consists of 6 groups of bottom rollers and 12 groups of top rollers with an outer diameter of 180 mm. The pneumatic drive ensures efficient feeding of the workpieces. The first bottom roller and the feeding table can move up and down simultaneously, which makes adjustments much easier.
Integrated high-strength alloy feed table.
The left and right spindles are designed for a double work table. The range of axial adjustment is 80 mm. It can accept two groups of cutting blocks.
The working height of the upper spindle and the working width of the left spindle are electrically adjustable, allowing for greater precision with easier operation.
The working height of the upper spindle and the working width of the left spindle are electrically adjustable for greater precision and easier operation.
Each feed roller, side pressure wheels, front and rear pressure plates of the upper spindle are pressed pneumatically. The pressure can be freely adjusted.
The second lower spindle has a motor with automatic lifting of the upper clamp. Shield with a diameter of 300 mm. The top pressure is pneumatically controlled also to increase the working width.
For efficient machining, the spindles are equipped with a powerful motor and driven by a synchronous belt.
Inverter feed speed 5-25 m / min.
The electric oil pump lubricates the worktable in time and dose (which can be adjusted), central lubrication of the moving parts with a manual oil pump.
Adopting PLC system to achieve control of each spindle motor and positioning device.
Movable PLC screen, convenient to use.
Adopting international grade electric components with consistent quality.
Pneumatic blower to keep the workplace clean.
A special safety cover protects against noise and dust.
Opinions
There are no reviews yet.