ADVANTAGES
- Polish production
- for 5 heads
- machines equipped with heads and cutters
- for the production of parquet
- unpainted
- used planer, very good condition
TECHNICAL DATA
Timber tenoning machine: | |
max length of the slat | 1250 mm |
min the width of the roll | 30 mm |
max width of the slat | 180 mm |
min the height of the roll | 10 mm |
max. height of the roll | 40 mm |
diameter of spindles | 30 mm |
max blade diameter | 250 mm |
5 spindles: | |
left side: | |
1) vertical top | 3kW |
2) horizontal lower | 2,2kW |
right side: | |
1) vertical lower | 3kW |
2) horizontal top | 3kW |
3) horizontal lower | 2,2kW |
all spindles adjustable up / down, right / left | + |
material pressure | 2szt |
smooth regulation of feed speed on the inverter | + |
diameter of the extraction nozzle | 5x100mm |
dimensions length / width / height | 2340x1900x1350mm |
Four side planer: | |
max width of the slat | 110 mm |
max. height of the roll | 30 mm |
spindle system: | |
1) bottom | 5,5kW |
2) right | 2,2kW |
3) left | 3kW |
4) upper | 3kW |
front / rear adjustable spindles | + |
diameter of 30mm spindles | right, left |
2 kinds of feed speed + forward / backward | + |
feed motor | 1,5kW |
diameter of the extraction nozzle | 4x100mm |
dimensions length / width / height | 1800x750x1350mm |
total weight about | 3000kg |
PRODUCT FEATURES
The two-sided tenoning machine is used to trim floor planks to the required length and to make grooves and projections on the fronts of planks.
A four-side planer is used for processing four longitudinal surfaces of flooring staves.
By replacing the cutters on two vertical spindles, any profile of lateral distortions can be obtained. The machine is used in small and large carpentry workshops.
Opinions
There are no reviews yet.