Edge banding machine OPTIMAT SCALAR PRO with pre-milling, corner cutting and two scrapers

ADVANTAGES

- new machine
- guarantee
- CE certificate
- professional

TECHNICAL DATA

PRODUCT FEATURES

This edge banding machine is used for finishing edges of furniture elements with veneers and edges made of PVC, ABS, etc. The maximum thickness of the edge must not exceed 3 mm. In this machine, most of the machining tools are mounted on the axes of high-speed motors powered by a frequency converter. It is a professional, very reliable solution as it eliminates belt drives with wearing belts. The SCALAR model is designed for continuous operation.

The term `` ready-made '' gluing is understood as performing the following operations in the automatic cycle (standard version):
- cutting the rim from the disc. Guillotine shears cut the appropriate sections of the edge from the disc located on the unwinder (max disc diameter - 800mm
- preheating the edges of the plate. The front guide is heated. This system allows you to dry the too wet edge of the board, on which the adhesive will then be applied.
- alignment of the board edges by pre-milling. Pre-milling eliminates the disadvantages that occur when cutting the plate, such as: lack of perpendicularity, scoring marks, edges "swollen" due to moisture, etc. Two diamond heads were used.
- applying glue to the edge of the board. An adjustable layer of hot melt glue is applied by a glue roller immersed in the heated glue tank. The tank is coated with Teflon and has 5 heaters with a total power of 1300 W.
- gluing the rim. Good bond between the rim and the plate is ensured by a set of 2 pressure rollers with adjustable pressure force and properly configured.
- cutting the beginning and end of the edge flush with the board. This operation is carried out by a 2-blade cutter, which cuts the front allowance first, then catches up to the back of the mat and cuts the back.
- longitudinal milling of the edge excess (flush with the board). The linear milling machine, which has cutters with a radius of 2 mm, simultaneously rounds the edges depending on the thickness of the edge.
- earning corners. This is done by a corner milling machine equipped with a radial cutter (R = 2mm) with diamond plates.
- radius correction and removal of excess glue (radial scraper).

Smoothes roundings after a linear milling machine. Only used for PVC edges. It can be easily turned off mechanically without losing its settings.
- polishing the edge of the rim after milling. The polisher has an upper and lower motor with fabric polishing discs (fi120 / fi20x20) with the possibility of tilting about 10 degrees

Alternative options instead of flat cyclin:
- polisher

The straight-line delivery of furniture forms, successively to individual processing units, is ensured by a mechanical feed consisting of a strong chain feeder and roller pressure. The rubber rollers and chain covers do not scratch even the delicate texture of the laminated boards (e.g. varnished boards).
The machine is controlled by an electronic panel with illuminated buttons. These buttons are placed in 2 rows. The buttons on the top row allow the individual processing units to move from the rest setting to the working setting (pneumatic actuator control). On the other hand, the buttons on the lower row turn on the machining tools of these units (motor control). The glue applicator control has an energy saving (standby) mode. It is enough not to use the feed for half an hour, and the temperature of the glue will be lowered to 150 degrees C to return to working conditions after turning on any engine of the machine.

The net price is calculated according to the euro exchange rate
(with higher price fluctuations the price may change)