0
0,00 PLN
basket is empty
Add something to the cart and do shopping
New
OPTIMAT LOGICA edge banding machine with pre-milling
67 000,00 PLN netto
82 410,00 PLN brutto
INSTALLMENTS 1083,33 PLN / month LEASING
to order
For the transaction EX and nip UE valid net price
ADVANTAGES
- new machine
- guarantee
- CE certificate
- professional
TECHNICAL DATA
| thickness of the rim | 0,4 - 3mm |
| thickness of glued boards | 12 - 45mm |
| difference in the width of the rim and the thickness of the board | max 4mm |
| the minimum length of glued boards | 90 mm |
| minimal width of glued boards | 90 mm |
| speed of mechanical feed | 7m/min |
| glue temperature | 130-250 °C (７７°F) |
| tank capacity | 1,2 l |
| rotations of the heads of the pre-milling machine | 9000obr./min. |
| collecting size of the pre-milling machine | 0 - 2mm |
| rotation of milling cutters of a linear milling machine | 10500obr./min. |
| rounding radius | R = 2mm |
| rotation of the cutter balls | 8800obr./min. |
| polishing discs rotation | 2800obr./min |
| installed power | 6,0kW |
| compressed air pressure | 7 - 8 bar |
| Extraction connector | min. 3.500 m3 / h 3 x fi 125mm |
| widened width. table (steady rest) | 560 mm |
| table working height | 856 mm |
| dimensions length / width / height | 3200 / 1200 / 1200mm |
| weight | 500kg |
PRODUCT FEATURES
This edge banding machine is used for finishing edges of furniture elements with veneers and edges made of PVC, ABS, etc. The maximum thickness of the edge must not exceed 3 mm.
The term `` ready-made '' gluing is understood as performing the following operations in the automatic cycle (standard version):
- cutting the rim from the disc. Guillotine shears cut the appropriate sections of the edge from the disc located on the unwinder (max disc diameter - 800mm)
- preheating the edges of the plate. The front guide is heated. This system allows you to dry the too wet edge of the board, on which the adhesive will then be applied.
- alignment of the board edges by pre-milling. Pre-milling eliminates the disadvantages that occur when cutting the board, such as: lack of perpendicularity, scoring marks, edges "swollen" due to moisture, etc.
● Two diamond heads were used.
● Applying glue to the edge of the board. An adjustable layer of hot melt glue is applied by a glue roller immersed in the heated glue tank. The tank is coated with Teflon and has 5 heaters with a total power of 1300 W.
● Gluing the edging. Good bond between the rim and the plate is ensured by a set of 2 pressure rollers with adjustable pressure force and properly configured.
● Cutting the beginning and end of the edging flush with the board. This operation is performed by a 2-blade cutter, which cuts the front allowance first, then catches up with the back of the mat and cuts the back.
● Milling of the edge excess lengthwise (flush with the board). The linear milling machine, which has cutters with a radius of 2 mm, simultaneously rounds the edges depending on the thickness of the edge.
● Correction of the radius and removal of excess adhesive (radial scraper). Smoothes roundings after a linear milling machine. Only used for PVC edges. It can be mechanically turned off without losing its settings.
● Polishing of the periphery after milling. The polisher has an upper and lower motor with fabric polishing discs (fi120 / fi20x20) with the possibility of tilting about 10 degrees
Alternative option, instead of polishing:
- removing excess glue (flat scraper)
The straight-line delivery of furniture forms, successively to individual processing units, is ensured by a mechanical feed consisting of a strong chain feeder and roller pressure. The rubber rollers and chain covers do not scratch even the delicate texture of the laminated boards (e.g. varnished boards).
The machine is controlled by an electronic touch panel.
The net price is calculated according to the euro exchange rate
(with higher price fluctuations the price may change)
You have to logto add a review.
Opinions
There are no reviews yet.